52 found, showing page 2 of 2
$244.99
2.5 GALLON WATER HEATER
The SHC 2.5, 2.5 gallon mini tank 120V (volt) electric water heater frees up precious space while providing plenty of hot water for hand washing or kitchen type applications. Why store 30 or more gallons of hot water when 2.5 gallons are sufficient for the job? By putting the hot water right where it is needed, you can reduce pipe runs from a central hot water tank. This reduces the use of water and energy. The smaller tank coupled with good insulation also reduces the stand-by losses in comparison with larger tank type water heaters. The unit installs right under or near the sink. Lightweight and compact, the SHC mounts to the wall (bracket included. You plumb it to the cold water supply line. Once it is filled with water, simply plug the 3-prong grounded pigtail (included) into a 110-120V outlet. With only an 11A (ampere) current draw, no special wiring is required. The unit offers a 6 year warranty on the tank, and 2 years on all the other components of the unit. Uses include: Commercial, Industrial, Institutional, and Residential such as: Office Buildings, Stores, Malls, Warehouses, Bathroom Sinks, Kitchen Sinks, Laundry Areas, Cabins/Cottages, Restaurants, Gas Stations, Schoo
View Details
$7.99
TUBE RUN OFF
3/4" Male pipe thread x 60" long. Hand tighten to side mounted T & P relief valves. Electroplated fitting. 230 deg. F. temperature rating.
View Details
$22.99
4500W/240V 1-3/8"ELEMENT
Screw-in 1-3/8 In. diameter electric water heater elements. For use in polymer tanks. Straight fold-back design. 240V. 3 year warranty.
View Details
$19.99
*3/4" T&P RELIEF VALVE
Series 100XL temperature and pressure relief valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU (British Thermal Unit)/hr (hour). They feature a bronze body with NPT (nominal pipe thread) male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Series 100XL is ASME (American Society of Mechanical Engineers) rated and CSA (Canadian Standards Association) listed.
View Details
$9.99
3/4Fx3/4C DIELCTRC UNION
Dielectric union F.I.P x solder, prevents electrolysis or galvanic action when connecting dissimilar materials. For usewith water up to 210 deg. F. Threaded ends comply with ANSI B1.20.1. Solder ends comply with ANSI B16.18. Lead-free.
View Details
$11.79
1"FX1"C DIELECTRIC UNION
Dielectric union F.I.P x solder, prevents electrolysis or galvanic action when connecting dissimilar materials. For use with water up to 210 deg. F. Threaded ends comply with ANSI B1.20.1. Solder ends comply with ANSI B16.18. Lead-free.
View Details
$289.99
13KW TANKLESS H20 HEATER
Configured for climates where incoming water temperatures are in the 60 deg. to 70 deg. F. range. Rated for 11 kW at 220 V; rated for 13.8 kW at 240 V. Self-modulating flow-sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses 2 standard Emerson Electric heating elements with brass tops to prevent electrolysis. Stainless steel heat exchanger. Automatic resettable thermostat. 60 DP breaker required. 54A draw. Required wire: 6 AWG. Pipe fitting: 1/2" CF. Activation flow: .25 gallon. Energy factor: 0.998. UL and CSA certified. Dimensions: 12" x 9.5" x 4". Weight: 6lbs. Limited lifetime warranty.
View Details
$479.99
18KW TANKLESS H20 HEATER
Configured for climates where incoming water temperatures are in the 60 deg. to 70 deg. F. range. Self-modulating flow-sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses (2) 9 kW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. (2) 40 DP breakers required. 75A draw. Required wire: 2 sets 8 AWG. Pipe fitting: 3/4" NPT. Energy factor: 0.998. UL and CSA certified. Dimensions: 14" x 17.75" x 4.25". Weight: 9 lb. Lifetime warranty.
View Details
$568.29
27KW TANKLESS H20 HEATER
Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 deg. F. For use in more demanding water usage applications. Self-modulating flow-sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses (3) 9 kW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. (3) 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4" NPT. Energy factor: 0.998. UL and CSA certified. Dimensions: 17" x 17.75" x 4.25". Weight: 11 lb. Lifetime warranty.
View Details
$249.99
*ECO8 7.3KW TNKLSS H20 HTR 220V
Configured for climates where incoming water temperatures are in the 60 deg. to 70 deg. F. range. Self-modulating flow-sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses standard Emerson Electric heating elements with brass tops to prevent electrolysis. Stainless steel heat exchanger. Automatic resettable thermostat. 40 DP breaker required. 27A draw. Required wire: 8 AWG. Pipe fitting: 1/2" NPT. Activation flow: .25 gallon. Energy factor: 0.998. UL and CSA certified. Dimensions: 12" x 9.5" x 4". Weight: 4.75 lb. Limited lifetime warranty.
View Details
$27.99
WATER HEATER STRAP
Less parts for easy installation. Fully adjustable from the front of the water heater. Case hardened lag bolts for extra strength. Eliminates having to wrap around the heater. No cutting required. California state approval. Los Angeles city approval.
View Details
$11.49
*WATER HEATER PAN 20"-22"
Plastic drain pan can be installed under electric water heaters to drain water away and protect floors from water damage. Manufactured from 0.0625 In. plastic polymer. Pre-cut side opening accommodates with a 1 In. to 1-1/2 In. PVC drain fitting to allow for connection to indirect drain. Pan depth is 2-1/2 In. Vicat Softening Temperature is 180 F (degrees Fahrenheit). Meets requirements of Southern Standard Building Code.
View Details
